Geyser Installation

A geyser is an essential household appliance that provides hot water for various purposes such as bathing and washing dishes. It is a reliable appliance that can last for many years with proper installation and maintenance. In this article, we will provide a comprehensive guide on how to install a geyser.

Step 1 – Geyser Selection

Before installation, it is essential to determine the type of geyser suitable for your needs. The two main types of geysers are tank and tankless geysers. Tank geysers store hot water in a tank and release it when needed, while tankless geysers heat water directly as it passes through the unit.

Tank geysers are suitable for larger households with consistent hot water usage, while tankless geysers are ideal for smaller households with occasional hot water needs. Additionally, the type of geyser selected should be energy efficient to minimize electricity bills.

Also, consider the capacity of the geyser needed for the household. It would be best to choose a geyser with a capacity that meets the household’s hot water demand to avoid constant heating and improve the geyser’s lifespan.

Step 2 – Location

Choose the appropriate location for the geyser installation. Ideally, the geyser should be installed near water outlets such as bathrooms and kitchens. It is essential to place the geyser on a sturdy surface that is strong enough to support the weight of the geyser and the water it contains. A concrete slab is an excellent option.

Ensure the location selected has proper ventilation to avoid carbon monoxide build-up. Carbon monoxide is a colorless, odorless gas that can be harmful if inhaled. Therefore, it is crucial to place the geyser in a well-ventilated area with ample space around it.

Step 3 – Electrical Requirements

Geysers use electricity to heat the water, and it is essential to ensure the correct electrical requirements are in place before installation. Check to confirm that there are adequate electrical circuits available to support the geyser’s requirements.

It is recommended to have a separate electrical circuit for the geyser to avoid overloading the circuit, leading to tripping. Also, ensure that the wiring system can handle the power required by the geyser. It would be best to consult an electrician to advise on the electrical requirements needed for the geyser installation.

Step 4 – Plumbing Requirements

Geysers require both hot and cold-water supply and, therefore, suitable plumbing requirements must be in place before installation. A qualified plumber should be consulted to ensure the plumbing system meets the geysers’ requirements.

It is essential to note that the hot water outlet should be connected to the geyser, while the cold water inlet connects to the geyser and the main water supply. Additionally, ensure the connections are tightly fitted to avoid any water leaks.

Step 5 – Installation

Now that all the requirements have been addressed, it is time to install the geyser.

  • Turn off the electrical supply to the designated area.
  • Install the necessary plumbing needs such as a pressure reducing valve and a pressure relief valve if not already installed.
  • Attach the pipes to the hot water outlet and the cold water inlet. Place the geyser on the designated location checking to ensure it is level.
  • Attach the pipes to the designated ports on the geyser.
  • Install the safety valve.
  • Turn on the water supply.
  • Check for any leaks on the connections.
  • Now that there are no water leaks, use a bucket to pour water into the geyser until it is full.
  • Switch on the geyser and leave it to heat up.
  • Once the water is heated, turn on the tap and let it run for a few minutes to allow any air trapped within the system to escape.
  • Install the electrical connections to the geyser.
  • Finally, switch on the geyser to ensure that it is working correctly.

Step 6 – Maintenance

After installation, it is essential to maintain the geyser for optimal performance. The geyser’s maintenance process includes periodic inspections, cleaning, and protecting the tank from corrosive damage. Here are some maintenance tips:

  • Inspect the geyser for any leaks regularly.
  • Drain and clean the geyser at least once a year to remove any residual sediments.
  • Check the anode rod regularly and replace it if necessary. The anode rod prevents the tank from corroding.
  • Inspect and tighten the connections regularly to ensure there is no leakage.
  • Check the thermostat regularly to ensure proper functioning.
  • Call a professional plumber to conduct any repairs or maintenance tasks beyond your skills.

Conclusion

Installing a geyser can be a daunting task but can be achieved with proper guidance and preparation. This comprehensive guide outlines the necessary steps needed for a successful geyser installation. Remember to select the appropriate geyser type and size, ensure electrical and plumbing requirements are met, and maintain the geyser for optimal performance.

It is essential to seek the guidance of a professional plumber or electrician if you have any doubts or uncertainties during the installation process. Geysers can be dangerous if not adequately installed, making proper installation critical.